All products

Large reels · Double-sided

Smart Shelf — 13"/15" Double-Sided

Double-sided 13"/15" storage — up to 896 reels per unit, with the same 3-second guided pick.

Smart Shelf — 13"/15" Double-Sided — Large reels · Double-sided
Capacity
Up to 896
Four layers configured for 8 mm tape
Tape widths
8–72 mm
4 layers

Overview

The double-sided 13"/15" shelf stores reels on both faces of a 700 mm deep unit — up to 896 reels in a four-layer configuration for 8 mm tape, with the same 3-second pick once a position is indicated. Reinforced shelving covers the full 8–72 mm tape range. It suits sites that want the largest reel buffer per unit, or a single shelf that serves two adjacent SMT lines from opposite sides.

Key specifications

  • Up to 896 reels — four layers configured for 8 mm tape
  • Supports 8–72 mm tape widths
  • Double-sided, loaded and picked from both sides
  • Reinforced shelves for large reels
  • Configurable per layer
  • Pick-to-light guidance
  • Sensor-confirmed picking
  • Runs on Nordec WMS out of the box
Length
2254 mm
Depth
700 mm
Height
1705 mm

Length × depth × height. From €8 per reel position, based on a 7" shelf configured for 8 mm tape.

Best fit for

Sites that need the largest buffer per unit

Shared shelf feeding two adjacent lines

Consolidating several manual shelving bays

Software & workflow

Nordec WMS runs the Smart Shelves out of the box.

Other ERP and MES connections are assessed per project; we configure and commission the setup for your site. See how this works in practice in the Plejd material-flow case study.

Step 1

Receive

Scan the shelf or cart and the reel, place it in the position shown, and finish the transaction. The reel is now registered to a location.

Step 2

Request

Select the pick list and the storage unit it should be picked from.

Step 3

Pick

LEDs indicate the required reel positions. The light switches off once the reel has been removed.

Step 4

Complete

The transaction is closed and the picked reels leave the registered locations.

See it in action

A short demonstration of storing and picking SMT reels on NORDEC Smart Shelves: the LED shows the position, the operator places or removes the reel, and the light switches off once the action is confirmed.

More videos on Nordec's YouTube channel
3 sec
Per reel once the LED indicates it
Confirmed
Sensor-confirmed picking
Modular
Configurable per layer
From €8
Per reel position · 7" shelf, 8 mm tape

Want this shelf configured for your line?

Send us your reel mix, footprint and integration stack — we'll come back with a tailored quote and an ROI estimate.

Start a quote